• Acronym Guide

533 Terms, Page 2 of 267

3GPP

Third Generation Partnership Project
International collaboration among telecommunications associations, with the purpose of developing and maintaining the Global System for Mobile Communications (GSM) specification for 3G mobile networks.

4G

Fourth Generation
A cellular network that uses fourth generation wireless technology to deliver mobile broadband internet access in addition to voice and text messaging. Two synonymous 4G systems are commercially deployed: Mobile WiMAX and Long Term Evolution (LTE). LTE is the predominant system in the U.S

Net2Edge

Home | Products | Discontinued Products

Discontinued Products

Net2Edge has discontinued some products in the following families:

  • PacketBand Plus, which deliver market-leading clock recovery for circuit emulation functionality. They support up to 4 E1/T1 lines and also provide support for serial interfaces: X.21, V.35 or RS530.
  • PacketBand ISDN, which can be used to deliver transparent, switched ISDN services across packet networks. Like all of Net2Edge’s pseudowire products it incorporates Net2Edge’s market-leading clock recovery performance.
  • Liberator™ S, which serves as Switch, an ISDN convertor, splitter and concentrator, allowing ISDN access to be shared across multiple devices as well as converting between PRI and BRI.
  • Liberator™ E, which is a highly reliable ISDN Converter, ISDN Splitter, Switch and Concentrator that can support between 8 and 32 PRIs

 

Customers can access FAQs and Product Manuals for these products in the Customer Support section of the website.

  • PB-PLUS-TDM-1VX

      The PacketBand+ TDM-1VX supplies a single clock- locked, clear-channel or structured E1/T1 and an X.21, V.35, RS232 or RS530 serial circuit over Ethernet or IP networks.

      Replacement Product: Liberator 225

       

    • Single E1/T1 port
    • Single RS530 DB25 female port (selectable via cable to V.35, X.21, RS530 or RS232)
    • Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP
    • Two 10/100/1000Mbps RJ45 interfaces & Single 100/1000Mbps SFP interfaces
    • Capable of exceeding G.823/4 Synchronous Interface requirements
  • PB-PLUS-TDM-4

      The PacketBand+ TDM-4 supplies clock-locked clear channel or structured E1/T1 circuits over Ethernet, or IP networks.

      For a replacement product: please enquire.

    • Four E/1/T1 ports
    • Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP
    • Capable of exceeding G.823/4 Synchronous Interface requirements Bullet 2
    • Five 10/100/1000Mbps RJ45 interfaces & Two 100/1000Mbps SFP interfaces
    • Management via CLI, Telnet, SSH, SSL, SNMP, Web GUI
  • LIBE-8 / LIBE-16 / LIBE-32

      The Liberator E is a high reliability ISDN Converter, ISDN Splitter, Switch and Concentrator.

      For a replacement product: please enquire.

    • 8, 18 or 32 PRI ports
    • Shares ISDN access between multiple local devices 

    • Hot swappable dual AC/DC power supplies available as an option
    • Shares ISDN access between multiple local devices
    • Local connectivity between any ports
  • Databand EV

      The DataBand EV interface converter provides transparent conversion from unstructured G.703 and optionally structured G.704 to either V.11/X.21 or V.35 interfaces.

      Replacement product: LIB-225-N. Please enquire about availability

    • G703 to V.11 or V.35 Converter
    • Optional support for G.704 (fractional) to V.11 or V.35
    • 64kbps to 2048kbps in G.704 mode
    • Support for T1 Interface
    • Remotely manageable via IP and serial connection
  • Databand ISU

      DataBand IMUX connects high speed serial data devices together using multiple ISDN calls, in effect dialling a high- speed “leased line” between non-ISDN devices.

      For a replacement product: please enquire

    • Basic Rate ISDN inverse multiplexer or I-Mux
    • Up to 4 ISDN 4-wire “S” interfaces
    • One or two V.35, RS530, X.21/V.11 interfaces
    • Support for T1 Interface
    • 4RS366, control lead, front panel or GUI dialling
  • PB-ISDN-1BNT & PB-ISDN-1BTE

      The PacketBand ISDN 1B can be used to extend a single BRI across a packet network.

      For a replacement product: please enquire.

    • Single BRI port
    • Single RJ45 packet port
    • 2 logical links
    • Euro-ETSI and US-ANSI ISDN available
    • ETSI to ANSI conversion
  • PB-ISDN-4U-NT-AC

      The PacketBand ISDN 4U can be used to extend up to four BRIs across a packet network. The BRI channels are presented as ‘U’ interfaces, which are commonly found in the US.

      For a replacement product: please enquire.

    • 4 BRI ports
    • 4 RJ45 packet ports
    • 16 logical links
    • Euro-ETSI and US-ANSI ISDN available
    • ETSI to ANSI conversion
  • PB-ISDN-8B

      The PacketBand ISDN 8B can be used to extend up to eight BRIs across a packet network.

      For a replacement product: please enquire.

    • 8 BRI ports
    • 2 RJ45 and 1SFP packet ports
    • 64 logical links
    • Euro-ETSI and US-ANSI ISDN available
    • ETSI to ANSI conversion
  • PB-ISDN-1P-SW

      The PacketBand ISDN 1P can be used to extend a single PRI across a packet network.

      For a replacement product: please enquire.

    • Single PRI port
    • 4 RJ45 packet ports
    • 30 logical links
    • Euro-ETSI and US-ANSI ISDN available
    • ETSI to ANSI conversion
  • PB-ISDN-4P-SW

      The PacketBand ISDN 4P can be used to extend up to four PRIs across a packet network.

      For a replacement product: please enquire.

    • 4 PRI ports
    • 4 RJ45 packet ports
    • 120 logical links
    • Euro-ETSI and US-ANSI ISDN available 

    • ETSI to ANSI conversion

Click here to contact us today »

Follow us